Cut the chain into two 1/2" pieces, and cut the remaining
5" into four equal pieces.
Place headpin through heart bead and create a wire wrapped
loop capturing the two 1/2 pieces of chain in the loop, set aside.
Cteate a loop in t he center of the 24g wire and slide
the four remaining pieces of chain into the loop.
With the loop centered on the bottom of the hoop, gently wrap the
wire around the hoop until each side is 1/2" from the center
of the top. I space the wraps about a 1/4" apart and don't
worry about perfection, as this is a funky pendant and the imperfections
are part of it's charm.
Slide the ends of the chain onto each of wires and continue wrapping
the hoop until you have reached the center.
Make a loop on top and wrap the wire. Trim and tack end.